Clutch Facing Weaving Machine Sj414

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: SJ414
• Part: Clutch Facing
• Classification: Friction Clutch
• Usage: Car, Tractors, Motorcycle
• Voltage: 380V
• Transport Package: Wooden Case
• Specification: 2040x780x1260mm
• Trademark: TOSUN
• Origin: Dalian
• Production Capacity: 1000PCS/Year
• Package Size: 2040.00cm * 780.00cm * 1260.00cm
• Package Gross Weight: 760.000kg

Product Description

Usage Range

The machine is used for weaving raw clutch facing for cars and tractors. The machine has horizontal structure, weaving plate is mounted upright.

Equipment Specification

Description	Specification
Plate type 1 diameter	raw facing inside diameter ≥Φ170mm raw facing inside diameter ≤Φ430mm
Plate type 2 diameter (optional)	raw facing inside diameter ≥Φ95mm raw facing inside diameter ≤Φ280mm
Width of raw facing	20-110mm
Petaline numbers	2.6; 3.6; 4.6
Main electrical engine	3kW, 125-1250 r/min, AC380V
Electrical engine for thread feeding	185W, 0-1500 r/min, DC110V
Plate rotary speed	53, 68, 84 r/min
Output	≥80 pcs/h for plate type 1; ≥120 pcs/h for plate type 2
Thread diameter	≤12mm
Size	2040x780x1260mm
Weight	760kg

Working Principle
The up and down movement of the wiring conduit and the rotation movement of the wiring reel are carried out simultaneously according to specific rules. By changing the meshing number of the variable speed gears, three different motion patterns can be obtained, corresponding to the number of entangled petals in 2.6, 3.6, and 4.6, respectively. Start the main motor and wire feeding mechanism, adjust the wiring reel to the appropriate speed, extend the wiring reel in place, adjust the cylinder pressure, and feed the wire into the wire feeding mechanism through the inlet. The wire is then wound onto the wiring reel through the wire feeding mechanism conduit and wiring conduit. After the wire is wound, return the wiring reel to its position and use a cutting knife to cut off the winding blank. Due to the certain viscosity of the wire, under the pressure of the main cylinder of the wiring tray, the wire is bonded to each other during winding, and the blank can be well maintained.